Designed for use in a sheltered environment, Cortec's ElectriCorr VpCI-248's continuous vapor action saves money by extending product life and eliminating downtime due to corrosion. ElectriCorr VpCI-248 forms a molecular film effective against aggressive environments, including industrial, marine and tropical climates. This film does not alter the electrical, resistance or magnetic properties. ElectriCorr VpCI-248 can be safely applied for protection of even low-voltage circuits or relays without causing any changes in conductivity. It can be safely used with plastics, elastomers and other non-metallics. In addition to corrosion protection, ElectriCorr VpCI-248 is an excellent contact cleaner of oils, grime and other contaminants. 9.45 oz. aerosol spray.

ElectriCorr VpCI-248 is an effective inhibitor of galvanic corrosion for most metals and alloys normally found in electronics applications, such as aluminum, copper, ferrous and non-ferrous metals. Application provides instant corrosion protection. ElectriCorr VpCI-248 is thermally stable, non-flammable, and based on environmentally sensible fluorocarbon solvents, which are exempts from VOC regulations by the US EPA.

Features:

• Non-flammable
• Instant corrosion protection
• Long-term protection
• Minimized field service
• Increased corrosion protection at a lower cost than conventional rust preventives
• CFC and 1,1,1-Trichlorethane-free
• Not listed as ODP, MAP or SARA reportable
• The carrier solvents are exempts from VOC regulations by the US EPA (October 8, 1996, September 24, 1997, Federal register)
• Vapor phase protection in vented or unvented enclosures
• May be used as a cleaning and defluxing agent
• Moisture-displacing and penetrating film
characteristics

Typical Applications:

• Ideal for general and precision cleaning
• Printed circuit boards
• Electrical contacts and components
• Electric motors
• Protects copper bearings, ferrous and non-ferrous metals, aluminum, etc.
• Can be used in contact with majority of engineering plastics, elastomers and other non-metallics
• Generators and junction boxes
• Spray for use after final assembly or in the field

Application:
Spray a very light mist over the area needing protection.
Note: Application of a heavy mist will result in a heavy film that sags and remains wet. More is not necessarily better and could cause fouling or other complications of electrical connections.
Application is effective for 6+ months with proper controls.

Storage:
ElectriCorr VpCI-248 should be kept from high temperatures and in normal warehouse conditions to prevent from freezing. ElectriCorr VpCI-248 has a shelf-life of 3+ years in sealed packages.

Shipping Weight 1.3 lbs.

Cortec Product Code: previously 35602516, currently 35661102.