The Inhibitor 20-gauge plug is used as a snap cap in the chamber of your firearm protecting the barrel, chamber and firing mechanism from corrosion and rust. Each plug is treated with a chemical compound that vaporizes into the enclosed area, penetrating even the smallest cracks and crevices, and places an invisible barrier over the metal surfaces to protect from rust and corrosion. The Inhibitor Nano-VCI plugs advanced vapor technology (NVCI) blends with moisture and oxygen, effectively neutralizing it, preventing corrosion from starting. The plug can also be hung inside a small safe, toolbox, electrical panel, etc. and will protect up to 27 cubic feet. The package contains one plug for a 20-gauge gun and mounting clip.

DIRECTIONS FOR USE AS A SNAP CAP: To open The Inhibitor Nano-VCI Plug, grasp the bottom of the plug and turn it counter-clockwise until the orange wick is fully exposed on all sides. You will feel the plug snap into the open position. The plug may now be inserted into the chamber of the appropriate gauge/caliber firearm, like a live round. Immediately the Advanced Vapor Technology (NVCI) begins to permeate through the weapon, effectively neutralizing the corrosive effects of any residual moisture.

DIRECTIONS FOR USE AS SAFE PLUG: To open The Inhibitor Nano-VCI Plug, grasp the bottom of the plug and turn it counter-clockwise until the orange wick is fully exposed on all sides. You will feel the plug snap into the open position. To hang the plug, slide the cradle clip onto the rib of the plug and attache the velcro tab to the cradle clip. Remove the plastic backing on the velcro so it will stick to the desired surface. Hang the plug inside a gun cabinet/safe, toolbox, electrical panel, etc. Be sure to hang the plug on the ceiling or top area of the enclosure to assist the vapors in protecting all metal surfaces.

Shipping Weight: .05 lbs.