VpCI-387 is a high-build topcoat that provides long-term corrosion inhibition for metal substrates in tough atmospheric conditions. VpCI-387 is excellent for applications that require a thicker coating for added physical protection. VpCI-387 can be applied directly to metal or used in conjunction with a primer (provided compatibility has been checked). VpCI-387 has excellent UV light resistance. VpCI-387 is available in custom colors.
- Consistent film build
- High-build film (6-8 mils/150-200 microns) DFT
- Multimetal protection
- Long-term protection (10 years)
- Semi-gloss appearance
- Non flammable
VpCI-387 must be thoroughly mixed prior to use. Apply by brush, spray, or roller. Normal WFT of 13-15 mils (325-375 microns) yields 6-8 mils (150-200 microns) DFT.
NACE (National Association of Corrosion Engineers): 2 or 3
SSPC (Steel Structure Painting Council): 6 or 10
ARS (American Rust Standard Guide): Low A-3 or better
Product cleanup: Use soap and water to cleanup tools and overspray.
Appearance: Viscous liquid, various colors
**Full Cure Time: 7 days
**Dry to Recoat Time: 4-7 hr.
**Dry to Touch Time: 30-60 minutes
Film Type: Hard
Non-volatile Content: 35-51% weight
Salt Spray (ASTM B 117): 500 hr @ 5-6 mils (125-150 microns) DFT on Carbon Steel
Prohesion (ASTM G-85): 1500 hr. @ 6-7 mils (150-175 microns) DFT on Carbon Steel
Shelf Life: 12 months @ 75°F/24°C
Theoretical Coverage: 92-123 ft2/gal at 6-8 mils (2.6-3.7 m2/l at 150-200 microns)
VOC Regulatory: 1.8-1.9 lb/gal (215-227 g/l)
VOC Actual: 0.8-0.9 lb/gal (95.8-107.8 g/l)
Density: 8.3-10.3 lb/gal (1.11-1.23 kg/l)
pH: 8.5-9.5 (Neat)
Temperature Resistance (Fully Cured): -150°F to 350°F (-78°C to 180°C)
DFT Recommended: 6-8 mils (150-200 microns)
*The physical properties vary for the custom color versions of VpCI-387.
** All dry times are at 70°F (21°C) at 50-55% Relative Humidity
Note: Coating dry time is affected by temperature, air-flow, and humidity.
Hose should be 3/8" (0.95 cm) I.D. minimum, but a ¼" (0.64 cm) I.D. whip end section may be used for ease of application. A maximum length of 100 feet (30.5 m) is suggested. Best results will be obtained using a 0.013"-0.017" (0.3-0.4 cm) tip at 1200-1700 psi (83-117 bar).
Avoid using VpCI-387 in situations where the coating is immersed in water or other liquids as this could lead to softening of the film.
Packaging and Storage
Available in 5 gallon pails (Cortec Product # 12500521) or 55 gallon drums (Cortec Product # 12500522). 5 gallon drum weighs 50 pounds and ships under our standard shipping rates. The 55 gallon drum must be shipped by truck. We will provide you with a freight quote before we ship this product. Do not allow product to freeze.
Quantity Discounts Available for Large Orders. Please call for more information.