This VpCI-395 Kit Contains 4 Gallons of Part A and 1 Gallon of Part B
VpCI-395 is waterborne epoxy primer that provides excellent adhesion, salt spray, immersion and long term corrosion protection to steel. VpCI-395 differs from other epoxy primers by minimizing long-term embrittlement and has a fast drying time (20-30 minutes dry to touch) as well as excellent corrosion resistance. Its water-based formulation makes it easier to comply with environmental regulations governing solvents and VOC limits. Clean up is easy by using soap and water.
Features:
- Provides long-term corrosion resistance in a corrosive atmosphere
- Water-reducible
- VOC compliant
- Fast drying
- Excellent adhesion
- Excellent immersion resistance
- Long pot life of 6-8 hours
- Works in HCI, H2S, SO2 and CO2 vapor environments
- UL Classified in accordance with ANSI/NSF Standard 61 for potable water (applies only to RAL 7046)
Mixing
Mix 4 parts of Part A to 1 part of Part B. Mix until a uniform coating is obtained. After mixing, do not apply VpCI-395 for at least 30 minutes. The pot life of VpCI-395 is approximately 6-8 hours at 75 degrees (25 degrees C). This value may change depending upon the temperature and size of the batch
Application
VpCI-395 may be applied by spray or brush. A dry film thickness of 1.5-3 dry mils (37.5 - 75 microns) is recommended. The coating dries in about 20-30 minutes; however, it takes approximately one week before the coating is fully cured. Top coats can be applied between 30 minutes and 8 hours after the primer is applied, depending upon the type of top coat and drying conditions.
Packaging and Storage
VpCI-395 part A is available in 5 gallon pail filled with 4 gallons. VpCO-395 part B is available in a 1 gallon can. You will receive both part A and part B as a kit when you order this item.
Quantity Discounts Available for Large Orders. Please call for more information.
