Item # FFGUNCA
In Stock - Ships Today
This system is designed for rapid delivery of Fluid Film on your surface. While designed for undercoating cars and trucks, this system can be used on any surface that requires covering a larger area quickly. Don't confuse this with some wimpy little hand pump sprayer, this tool makes noise like any good tool should. The reservoir handles 32 oz. of Fluid Film. An air compressor is required to use this product.
This sheet hot rolled steel was used for a Fluid Film demonstration.
Compressed air and the Fluid Film Undercoating gun was used to apply Fluid Film.
Half of the steel was masked off. Fluid Film was applied to the left side.
The left is treated with Fluid Film, the right is left unprotected.
A salt solution was made to simulate salty road conditions.
Extra salt crystals were added to make the test even more harsh.
To simulate the tough weather conditions it was left in the snow.
After 4 days of exposure, it is obvious which side was treated and which side was not. Congrats Fluid Film!
Q. Can I use the standard Fluid Film in this gun or do I need to use Liquid A formulation?
A. You can use the standard Fluid Film in this gun. In fact, we recommend it. The standard formulation holds up under outdoor conditions while the Liquid A is not meant for long term outdoor exposure.
Q. What is the recommended pressure for applying Fluid Film?
A. Fluid Film needs to be sprayed at 60-80 psi.
TheRustStore.com | 8376 Murphy Dr Middleton WI 53562 | 1-877-256-9301
Copyright © 2006-2019 Wingra Direct LLC. All Rights Reserved.