Solid Rust Prevention for Your Vehicle in a Convenient Aerosol Can
The underbody of your car or truck takes some serious abuse. It suffers a barrage of road debris with every mile. And along with the dust and dirt comes water, and in many parts of the country, de-icing chemicals like rock salt and magnesium chloride. The result of this pummeling is rust, unless you take steps to protect your vehicle.
Valugard VG-104A Aerosol Undercoating is an easy to use, durable coating that provides rust protection for the under body of your car, truck or RV. It is wax based and remains flexible in the coldest temperatures but will not run or drip even in the hottest, and its black color gives a finished appearance to wheel wells and other visible areas. When applied in a thicker coating, it even provides sound deadening insulation.
To apply, make sure the surface is free of grease, rust and wax. Shake the can well and hold 12” to 14” inches away from the surface while spraying. Apply in light coats to a thickness 12 to 15 mils (1 mil = 1/1000”) for corrosion protection and 60 mils (approximately 1/16”) for sound deadening. Let dry for 30 minutes. Dried material can be removed with mineral spirits.
Take care not to apply to drive shaft, oil pan, brake drums or disks, heat shield, transmission, exhaust manifold catalytic converter or parking brake cable.
One 12 oz. can covers approximately 20 square feet at 12 mils. An entire car underbody typical requires 5-6 cans, a truck 6-8.