EcoAir® Biobased Outdoor Coating powered by Nano VpCI® is a biobased temporary coating designed for severe marine and high humidity conditions. It comes in a convenient EcoAir® spray can, and is classified as a non-flammable material.
EcoAir® Biobased Outdoor Coating powered by Nano VpCI® provides multi-metal corrosion protection and is temperature stable to 180 °F (82 °C). It leaves behind an oily protective film that does not dry.
EcoAir® Biobased Outdoor Coating powered by Nano VpCI® is a USDA Certified Biobased Product. It contains 65% USDA certified biobased content and is a qualified product under the mandatory federal purchasing initiative of the USDA BioPreferred® Program.*
PACKAGING & STORAGE
EcoAir® Biobased Outdoor Coating powered by Nano VpCI® is available in 11.2 oz (318 g) net wt air-pressurized recyclable steel cans.
To ensure best product performance, store in original packaging, indoors, and out of direct sunlight at 40-100 °F (4-38 °C).
Shelf life: 2 years
Characteristics / Technical Data
- Volume Solids - 78-82% VOCs (ASTM D3960) 1.5 lbs/gal (180 g/L)
- Spreading Rate - 1274 sq.ft/gal @ 1.0 mils DFT (31.3 sq.m/L @ 25 µm)
- Flash Point - 203 °F (95 °C)
- Recommended DFT - 1.0-3.0 mils (25-75 µm)
- Recommended WFT - 1.20-3.60 mils (30-90 µm)
- Dry to Touch - NA
- Dry to Handle - NA
- Salt Spray (ASTM B117) - 300+ hrs Humidity (ASTM D1748) 1000+ hrs
- Adhesion - (ASTM D3359) NA
- Flexibility - (ASTM D522) ½" mandrel (1.27 cm)
Surface Preparation
Substrate should be free of grease, oil, dirt, fingerprints, drawing compounds, rust inhibitors (except Cortec® approved), or any other surface contamination that could affect adhesion. Cortec® recommends a minimum of SSPC-SP1 over painted surfaces. For bare metal applications, Cortec® recommends NACE #3/ SSPC-SP6. Consult Cortec® Technical Service and/or test system adhesion prior to full scale application.
Cleanup
Clean tools/equipment immediately after use with mineral spirits when coating is still wet. For removal of EcoAir® Biobased Outdoor Coating powered by Nano VpCI® applied to a metal surface, use a VpCI®-41x series alkaline cleaner/ degreaser. Follow mfg’s safety recommendations when using any solvent
*For more information, go to: https://www.biopreferred.gov. EcoAir® Biobased Outdoor Coating powered by Nano VpCI®.
